怎樣減少通風管道內的阻力？

發布人：http://hwzxw.net   發布時間：2018-10-23 14:21:04

通風管道我們都不陌生，主要使空氣流通，降低有害氣體濃度。但是我們在設計通風管道時，要注意管道內的阻力問題，那么如何如何減少通風管道內的阻力呢？下面跟隨我們一起來看一下。

Ventilation ducts are not new to us. They mainly circulate the air and reduce the concentration of harmful gases. But when we design the ventilation duct, we should pay attention to the resistance problem in the duct, so how to reduce the resistance in the ventilation duct? Let's take a look together below.

1、通風管道設計時彎曲的角度要盡量呈弧形。

1, the bending angle of ventilation pipe design should be curved as far as possible.

2、所用材料應具有導熱性小、保溫，耐腐蝕、耐火等性能。

2, the materials used should have small thermal conductivity, thermal insulation, corrosion resistance, fire resistance and other properties.

3、支管的半徑不得小于主管半徑的1/2-1/3，便于山東通風管道的加工。

3, the radius of the branch pipe shall not be less than 1/2-1/3 of the radius of the main pipe, so as to facilitate the processing of ventilation pipes in Shandong.

4、通風管道設計時不宜太長，在可能條件下;管徑要粗，式樣以圓形為佳。

4, ventilation pipe design should not be too long, under the possible conditions; the diameter should be thick, and the pattern should be round.

5、盡量直立或傾斜放置，設置清掃口，連接部分應嚴密不漏氣，并便于檢修。

5. Place upright or tilted as far as possible. Set up a sweeping port. The connecting part should be tight and airtight, and be convenient for maintenance.

6、通風管道設計時彎頭要盡量少，兩個彎頭的距離要大些。當兩個彎頭的距離為管徑的3倍時，阻力大約增加80%;若為5倍時，則僅增加30%。

6, the elbow should be designed as little as possible, and the distance between the two elbows should be larger. When the distance between the two elbows is three times of the pipe diameter, the resistance increases by about 80%; if it is five times, it only increases by 30%.

以上6點就是減少通風管道內的阻力的方法，其實在設計通風管道時，有效的減少管道內的阻力，操作起來還是比較簡單的，只要我們在設計時多方面考慮，就可以減少通風管道內阻力的產生，希望能夠幫助到您。

The above six points is to reduce the resistance in the ventilation duct method, in fact, in the design of the ventilation duct, effectively reduce the resistance in the duct, the operation is relatively simple, as long as we consider in many aspects in the design, we can reduce the resistance in the ventilation duct, hoping to help you.