排煙管道應該怎么安裝？

發布人：http://hwzxw.net   發布時間：2019-02-28 10:32:31

排煙管道的裝置有利于室內空氣的流轉，并且能夠有效的下降有毒氣體的濃度，下面就為我們介紹一下排煙管道裝置的一些注意事項。

The device of smoke exhaust pipe is conducive to the flow of indoor air, and can effectively reduce the concentration of toxic gases. Here we introduce some points for attention of smoke exhaust pipe device.

處理各種排煙管道相碰及調和的原則，一般為：“小管讓大管，有壓讓無壓”。例如，自來水管與風管相撞，則應當自來水管拐彎。冷、熱水管與下水管相碰，則應改變冷、熱水管道，排煙管道是為了使空氣流轉，下降有害氣體濃度的一種市政基礎設施。

The principle of dealing with the collision and harmonization of various smoke exhaust pipes is generally as follows: "Small pipe let big pipe, pressure let no pressure". For example, when a water pipe collides with an air pipe, the water pipe should turn. When the cold and hot water pipes collide with the sewer pipes, the cold and hot water pipes should be changed. The smoke exhaust pipe is a municipal infrastructure to make the air flow and reduce the concentration of harmful gases.

排煙管道裝置裝置所用板材、型材以及其他首要制品材料應契合規劃及有關商品現行規范的規矩，并運用出廠查驗合格證明，材料出場時應按現行有關規范進行查驗。

Material used in flue gas exhaust pipe installations shall conform to the regulations of the planning and the current national standards for related commodities, and shall be inspected according to the relevant national standards when the materials appear on the scene using the certificate of qualifications for factory inspection.

排煙管道工程開端之前，應該將各工種的管線，單線畫在一張平面圖上。每種管道用一種彩色筆。在各交點處概括其標高，看是不是有矛盾之處，及時發現，將問題處理在裝置之前。

Before the beginning of the flue gas pipeline project, the pipelines of various types of work should be drawn on a single plane map. Each pipe uses a colour pen. Summarize the elevation at each intersection to see if there is any contradiction, find out in time, and deal with the problem before the device.

在熱處理車間，排煙管道裝置需求按照車間裝置工藝圖紙進行裝置，然后根據實際需求進行調整，如果還不能保持室內溫度安穩，需求對車間溫度裝置調整器，一般的車間會以空調替代，所以我們也要為空調加裝通風設備，這些裝置的通風系統都是必不可少的。

In heat treatment workshop, the requirement of smoke exhaust pipe device is adjusted according to the process drawings of workshop device, and then according to the actual requirement. If the indoor temperature can not be kept stable, the requirement of workshop temperature device regulator will be replaced by air conditioning in general workshop, so we also need to install ventilation equipment for air conditioning. The ventilation system of these devices is indispensable.

通風管道裝置好以后需求考慮的因素就是耐腐蝕，由于大多數的熱處理車間都是在較高溫度下作業的，有時需求用水進行冷卻，這就會造成大量的水蒸氣蒸騰，這些氣體中都含有腐蝕性物質，所以管道一定要耐腐蝕。

After the installation of ventilation pipeline, the need to consider the factor is corrosion resistance, because most heat treatment workshops are operating at higher temperatures, and sometimes need water for cooling, which will cause a lot of steam transpiration, these gases contain corrosive substances, so the pipeline must be corrosion-resistant.

以上信息是我們山東通風管道整理發布希望對于大家有所幫助我們的網站是：http://hwzxw.net！

The above information is our Shandong ventilation duct arrangement and release hope to help you with our website is: http://hwzxw.net!