通風管道維護加工應做到7點！

發布人：http://hwzxw.net   發布時間：2021-03-01 14:31:38

隨著人們的生活越來越好，關于生活壞境以及工作環境的懇求也是越來越高，建筑內部都會安裝通風管道，運用通風管道加工應留意維護保養。通風管道對我們的生活已經非常重要，把通風管道的維護做好了，這樣才能保證使用時的性，更好的運行。

With people's life getting better and better, the appeal about the living environment and working environment is also getting higher and higher. Ventilation pipes will be installed inside buildings, and the use of ventilation pipe processing should pay attention to maintenance. The ventilation pipe is very important to our life, the maintenance of the ventilation pipe is done well, so as to ensure the safety of use and better operation.

1、運轉操作需嚴厲執行操作規程，控制工藝指標，根絕超溫、超壓運轉；

1. The operation should strictly follow the operation rules, control the process indexes, and eliminate the over temperature and over pressure operation;

2、檢修或局部改換通風管道時，避免錯用或不合理代用而降低管道的極 限應力；

2. When the ventilation pipe is repaired or partially replaced, it should be avoided to reduce the limit stress of the pipe due to misuse or unreasonable substitution;

3、通風管道系統應按規則裝設安.全泄壓裝置并堅持其靈敏好用；

3. The ventilation pipe system should be equipped with safety relief device according to the rules, and it should be sensitive and easy to use;

4、通風管道加工需由有資歷的設計單位中止設計并契合設計規范的規則；

4. The ventilation duct processing should be stopped by qualified design units and conform to the rules of design specifications;

5、采取有效措施防止大氣及介質對通風管道的腐蝕；

5. Effective measures should be taken to prevent the corrosion of air and medium to ventilation pipes;

6、通風管道安裝工程投用前應中止役前檢查和驗收，管系結構、材料、焊接、熱處置、壓力實驗等關鍵環節需契合規則懇求；

6. The pre service inspection and acceptance should be suspended before the ventilation pipe installation project is put into use, and the key links such as pipe structure, material, welding, heat treatment and pressure test should conform to the rules;

7、對長期放置不用、維護不良的通風管道，因發作大面積腐蝕、厚度減薄、強度削弱，再次啟用前按規則全.面檢驗。

7. Due to large area corrosion, thickness thinning and strength weakening of ventilation pipes which are not used for a long time and are poorly maintained, full face inspection shall be carried out according to the rules before they are put into use again.

以上就是日常維護通風管道加工應做到這7點的介紹，希望上面的內容對大家有所幫助，大家如果想要了解更多這方面的資訊，歡迎隨時聯系山東通風管道http://hwzxw.net 。

The above is the daily maintenance of ventilation pipe processing should do these 7 points, I hope the above content to help you, if you want to know more about this information, please feel free to contact Shandong ventilation pipe http://hwzxw.net  .