通風管道的組成一般包含哪些部分?
發布人:http://hwzxw.net 發布時間:2021-08-17 11:35:39
1、通風管道。在通風系統中,依靠通風管來送入或抽出空氣。通風管的截面有圓形和矩形。通風管除直管外,由彎頭、來回彎、變徑彎,三通、四通等管件按工程實際需要組合而成。
1. Ventilation duct. In the ventilation system, air is fed or extracted by means of ventilation pipes. The cross section of the ventilation pipe is circular and rectangular. In addition to the straight pipe, the ventilation pipe is composed of elbow, back and forth bend, reducing bend, tee, cross and other pipe fittings according to the actual needs of the project.
2、各類風口。為了向室內送入或室內排出空氣,在通風管上設置的各種型式的送風口或吸風口,以調節送入或吸出的空氣量。風口的類型很多,常用的類型是裝有網狀和條形格柵的矩形風口,設有聯動調節裝置,其他的類型沒有聯動調節裝置。風口分為單層、雙層、三層及不同形式的散流器。
2. Various air outlets. In order to send or discharge air into or out of the room, various types of air supply outlets or suction outlets are set on the ventilation pipe to adjust the amount of air sent or sucked in. There are many types of tuyeres. The commonly used type is the rectangular tuyere with mesh and strip grille, which is equipped with linkage adjustment device. Other types have no linkage adjustment device. The tuyere is divided into single layer, double layer, three layers and different forms of diffusers.
3、閥門。安裝于風管上的用以調節風量和關閉個別支管的通風部件。通風與空調工程常用的閥門有插板閥、蝶閥、多葉調節閥、圓開瓣式啟動閥、空氣處理室中旁通閥、防火閥和止回閥等
3. Valve. Ventilation components installed on the air duct to adjust the air volume and close individual branch pipes. The valves commonly used in ventilation and air conditioning engineering include gate valve, butterfly valve, multi leaf regulating valve, round open disc start valve, bypass valve, fire damper and check valve in air treatment room,
4、消聲器。防止噪聲傳入室內所采用的裝置。在空調工程中采用的有阻性捎聲器、抗性捎聲順、共振性消聲器和寬頻帶復合式消聲器等。
4. Muffler. A device used to prevent noise from entering the room. In the air conditioning project, the resistive sound carrying device, resistant sound carrying device, resonant muffler and broadband composite muffler are used.
5、除塵器。是凈化空氣的一種設備,一般分為旋風式除塵器、濕式除塵器和袋式除塵器等。
5. Dust collector. It is a kind of equipment for purifying air. It is generally divided into cyclone dust collector, wet dust collector and bag dust collector.
6、通風機。是機械通風系統中迫使空氣流動的機械。通風機是通風與空調系統的主要設備,根據構造原理分為軸流式通風機和離心式通風機兩類。
6. Ventilator. It is the machinery that forces air flow in the mechanical ventilation system. Fan is the main equipment of ventilation and air conditioning system. According to the structural principle, it is divided into axial flow fan and centrifugal fan.
7、風帽。它用于排風系統的末端,它的作用是向室外排除污濁空氣。按其形式分有:適用于一般機械排風系統的傘形風帽,適用于除塵系統的錐形風帽,適用于自然排風系統的簡形風帽。
7. Hood. It is used at the end of the exhaust system. Its function is to remove dirty air to the outside. According to its form, it is divided into: umbrella hood suitable for general mechanical exhaust system, conical hood suitable for dust removal system and simple hood suitable for natural exhaust system.
本文由濟南通風管道整理發布,您是不是對這些內容有所了解了呢?更多的內容請點擊: http://hwzxw.net我們會有更多精彩內容等你查看。
This article is compiled and released by Jinan ventilation duct. Do you know something about these contents? For more information, please click: http://hwzxw.net We will have more wonderful content for you to see.
上一篇:清洗通風管道這些方法要用上!
下一篇:廚房排煙管道安裝要注意什么?