風管加工進程中會觸及到的質量問題
發布人:http://hwzxw.net 發布時間:2023-04-17 14:19:58
通風管道是通風和空氣調度體系的重要組成部分,大部分都是由管道加工設備(如通風管道出產線)制成。但是因為各種各樣的原因,或許導致管道加工設備加工而成的通風管道呈現問題。下面濟南風管加工廠來講講風管加工進程中會觸及到的質量問題:
Ventilation ducts are an important component of the ventilation and air dispatch system, and most of them are made from pipeline processing equipment (such as ventilation duct production lines). However, due to various reasons, the ventilation ducts processed by pipeline processing equipment may present problems. Below, Jinan Air Pipe Processing Factory will discuss the quality issues that may be encountered during the air pipe processing process:
1、加工資料未達標
1. Processing data not up to standard
①體現:板材外表不平坦,厚度不均勻,有顯著的壓痕、裂紋、砂眼和銹蝕等狀況;通風管道平面下沉,周圍面向外凸起,有顯著的變形。
① Embodiment: The surface of the board is uneven, with uneven thickness and significant indentation, cracks, sand holes, and rust; The ventilation duct sinks flat and protrudes outward, with significant deformation.
②影響:作業時通風管道漏風,空調負荷增加,一同風壽數和功用被影響。
② Impact: During operation, the ventilation duct leaks, the air conditioning load increases, and the lifespan and function of the ventilation system are affected.
③原因:資料不合格,不能滿意制造通風管道的需求。
③ Reason: The information is not qualified and cannot meet the demand for manufacturing ventilation ducts.
④辦法:在運用風管加工設備制造通風管道前,要先查看資料出廠合格證書和資料質量證明還有外觀厚度等,確保資料是可用的。
④ Method: Before using air duct processing equipment to manufacture ventilation ducts, it is necessary to first check the factory certificate, quality certificate, appearance thickness, etc. of the materials to ensure that they are available.
2、通風管道翹角及彎頭視點禁絕
2. Prohibit the viewing point of ventilation duct warping angles and bends
①體現:矩形通風管道兩相對平面、兩頭面不平行;折角不平直;對角線不相等;咬口不嚴。
① Reflection: The rectangular ventilation duct has two opposite planes and two end faces that are not parallel; Uneven bending angle; Diagonal inequality; The bite is not tight.
②影響:會使通風管道聯承受力不均勻,設備后的通風管道不平直,法蘭盤墊片不緊密,體系漏風,構成空調負荷丟掉,而且縮短運用壽數。
② Impact: It will cause uneven bearing capacity of the ventilation ducts, uneven ventilation ducts behind the equipment, loose flange gaskets, and system air leakage, resulting in loss of air conditioning load and shortened service life.
③原因:板下料放樣禁絕確;通風管道兩兩平行,相對面的板料長度和寬度不相等。
③ Reason: The cutting and layout of the board are strictly prohibited; The ventilation ducts are parallel in pairs, and the length and width of the opposite panel are not equal.
④辦法:翻開下料時,應對板料嚴厲角方,對每片板料的長度、寬度以及查驗對角線,使它們的差錯操控在容許規模內;下料后的板料,應將通風管道相對面的兩片板料重合查驗規范性。
④ Method: When opening and cutting, the sheet should be strictly angled, and the length, width, and diagonal of each sheet should be checked to ensure that their error handling is within the allowable scale; After cutting, the two plates on the opposite side of the ventilation duct should be overlapped and checked for standardization.
風管加工進程中會觸及到的質量問題相關內容就講解到這里了,希望能夠幫助到您,更多事項就來我們網站http://hwzxw.net咨詢了解吧!
That's all for the quality issues that may arise during the processing of air ducts. We hope it can help you. For more information, please come to our website http://hwzxw.net Consult and understand!
上一篇:全部通風工程需求和水簾作用介紹
下一篇:通風管道與空調工程常見質量通病及處理!