濟南風管遇到下列難題怎么處理？

發布人：http://hwzxw.net   發布時間：2023-12-23 17:22:22

一、自然通風鍍鋅板風管應在運輸過程中避免被破壞的風管。

1、 Natural ventilation galvanized sheet air ducts should avoid damaged ducts during transportation.

二、當玻璃纖維夾芯板的鍍鋅板風管端口號是切割面時，運用膠布或強力膠密封性，避免玻璃纖維在安裝法蘭聯接件以前曝露和分散化。

2、 When the galvanized air duct port number of the fiberglass sandwich panel is the cutting surface, use adhesive tape or strong adhesive for sealing to avoid exposure and dispersion of fiberglass before installing flange connectors.

三、當空氣鍍鋅板風管選用路面自帶配組裝時，由于自作用力的彎折，自帶配長短比較有限，避免氣體鍍鋅板風管毀壞組員頁面。

3、 When using road mounted assembly for air galvanized sheet air ducts, the length of the built-in assembly is relatively limited due to the bending of the self acting force, to avoid damaging the team member page of the gas galvanized sheet air duct.

四、軸豎直自然通風鍍鋅板風管組裝，由于空間小，不方便維護保養以后，因而角鐵法蘭風管一般選用外衣聯接提升優點的水平和抗壓強度，并使法蘭“嗯”方式，鋼衣服架掛在耳的角鐵法蘭立即并沒有設定的適用。

4、 The assembly of galvanized sheet air ducts with vertical natural ventilation, due to the small space, is not convenient for maintenance and upkeep. Therefore, angle iron flange air ducts are generally connected by outer clothing to improve the horizontal and compressive strength of the advantages, and the flange "hmm" method is used. The angle iron flange of the steel clothes rack hanging on the ear is not immediately applicable.

一樣在針對鍍鋅風管開展組裝的全過程之中也需要多注意一下，因為它實際操作噪音大，并且應用周期短，因此必須為此開展一下關心才可以。鍍鋅風管的使用注意事項針對鍍鋅風管而言它憑著其優良的防火性能能不錯的應用于凈化設備送到風管、家用空調風管、行業送排風系統風管、系統吸排風管、礦井抽放瓦斯管、礦井涂膠帶吹風筒等諸多場所。

It is also necessary to pay more attention to the assembly process of galvanized air ducts, as they have high operating noise and short application cycles. Therefore, it is necessary to pay attention to them. Precautions for the use of galvanized air ducts. For galvanized air ducts, they can be well applied in many places such as air ducts for purification equipment, household central air conditioning air ducts, industry air supply and exhaust system air ducts, environmental protection system suction and exhaust air ducts, mine gas drainage pipes, mine tape blowing tubes, etc. due to their excellent fire resistance performance.